MEC 885 / Ni 5Al Thermal Spray Wire For Arc and Flame Spray Systems

                        MEC 885, Ni 5Al, for Thermal Spray Wire which                           is used in Arc and Coating

NiAl 95/5: Thermal Spray Wire (Sp 95/5, SD 95/5, Ni95Al5) 

NiAl 95/5 is an austenitic nickel-aluminium alloy (NiAl alloy) for use in arc and flame spray systems. The alloy produces dense, well bonding coatings.

Typical applications for NiAl95/5 are bond coats, as protective coatings against high-temperature oxidation, protective coatings against scaling of conventional iron base alloys and as build-up coatings for dimensional restoration.

Chemical Composition: Ni ~ 95, Al ~ 5 

Application or Properties: Spray wire with excellent bonding strength. Sprayed layers of this material are-resistant to variation in high temperatures and are used as a buffer layer for all other spraying alloys. Hardness, coating macro: Approximately HRc 22. Maximum working temperature: Approximately 800° C. Layer thickness: Approximately 0.1-0.15 mm.

Technical Index

1 Coating Hardness: 23~25 HRC

2 Bond Strength: 60Mpa above

3 Working Temperature: 1250 °C below

Typical Deposit Characteristics: